texture
texture
header-logo
nav-shape
nav-shape

Fire Systems

Home Fire Systems
angleBg2
Company Logo0
Company Logo1
Company Logo2
Company Logo3
Company Logo4
Company Logo5
Company Logo6
Company Logo7
Company Logo8
Company Logo9
Company Logo10
Company Logo11
Company Logo12
Company Logo13
Company Logo14
Company Logo15
Company Logo16
Company Logo17
Company Logo18
Company Logo19
Company Logo20
Company Logo21
Company Logo22
Company Logo23
Company Logo24
Company Logo25
Company Logo26
Company Logo27
Company Logo28
Company Logo29
Company Logo30
Company Logo31
Company Logo32
Company Logo33
Company Logo34
Company Logo35
Company Logo36
Company Logo37
Company Logo38
Company Logo39

About Service

We offer the best integrated fire systems and early warning systems and automatic extinguishing services

OUR BLOG

fire cabinet
fire cabinetFire Hose CabinetFire boxes are subject to the requirements of the US Code of NFPA and are divided into two typesHose Reel: A rubber hose wrapped on a bobbin with an arm.Hose Rack: It is a hose made of reinforced fabric that is installed on a rack, and it is mostly used by civil defense, but the first type is used by individuals inside buildings.It has three forms of installationExposed: It should be protruding from the wall and outside it at a distance of 25 cm. The box should be installed on the wall.Semi-predated: It is protruding from the wall with a distance of 10 cm, meaning that it is submerged in the wall by 15 cm.Recessed: It is submerged in the entire wall.All types are available in red and steel, including what comes with a side cabinet for the fire extinguisherInstallation sites:Near the escape stairs.In garages at the entrances and exits of cars.Next to the main door of the building.The height of the box from the ground ranges from 90 cm to 150 cm.In the event of the spread of fire and the difficulty of fighting the fire from inside the building, fire hydrant fire fighters are made and distributed so that each one covers 30 m and is located around the building. It is a 2.5″ tap and 4.5 bar pressure and gives 250GPMIn some countries, a Dry Riser is made. It is connected to every role connected to the fire pump. The pipe is 4″ and a Check Valve is installed on it. The Riser ends with Siemens Connection, and the pipe is called a Landing Valve. fire hydrantsTherefore it is necessary to:That this connection be visible to the firefighter and be in the face of the building.In the event that there is more than one facade of the building, it is installed on each facade.It must be reached easily and there are no obstacles in front of it.
Extinguish CO2
Extinguish CO2Carbon dioxide extinguishing system:the definition :It is a network of pipes distributed in the places required to be protected from the danger of fire. It is fed by compressed carbon dioxide gas cylinders as it rushes when operating through the spray nozzles under a certain pressure. Its particles are scattered at a certain concentration in the protected space and works to suffocate and extinguish the fire and prevent its spreadMaterial composition and propertiesCarbon dioxide consists of one carbon atom and two oxygen atoms. It is a colorless, odorless, non-flammable gas that is 1.5 times heavier than air. It dissolves in water and is used as an extinguishing medium.This system is considered effective for its use in protecting the following places and cases:A – flammable liquidsB- Electricity rooms and places of dangerous electrical connections (transformers and electrical circuit breakersC- Engines that run on liquid fuels (petroleum derivativesD- Storage places for paper, fabrics (petroleum textiles) and woodE – Hazardous and flammable solids
Hood fire extinguishing system
Hood fire extinguishing systemThis system is used to put out kitchen fires resulting from the accumulation of grease in chimneys or fires resulting from grills, fryers and stoves, which cause large fires to be extinguished by chemical liquidIt is a very important system in hotels and restaurants

OUR PRODUCTS

we will assist you

Quick Contact